MARINE TRANSCEIFER WITH - HT ICOM IC M24

Icom IC-M24 VHF marine transceiver Specifications General Frequency Range Tx : 156.025– 157.425 MHz Rx : 156.050– 163.275 MHz Usable channels INT, USA, CAN, WX channels Type of emission 16K0G3E ( FM) Current drain ( at 3.7V DC) Tx ( High) Rx ( at AF max.) Power save 2.3A 350mA typ. 8mA typ. Operating temperature range -20° C to + 60° C; -4° F to + 140° F Antenna Impedance 50© ( Stud) Dimensions ( W× H× D) ( Projections not included) 58.5 × 128.5 × 34.5 mm; 2.3 × 5.06 × 1.36 in Weight ( approx.) 260g; 9.2 oz ( With BP-266, FA-SC58V, MB-124) Specifications Transmitter Output power ( Hi/ Mid/ Low) 5W ( High) , 1W ( Low) Max. frequency deviation ± 5 kHz Frequency stability ± 10ppm Spurious emissions – 68dBc typ. Adjacent channel power 70dB Audio harmonic distortion 10% ( at 60% dev.) Residual modulation 40dB Receiver Sensitivity ( at 12dB SINAD) 0.25µ V typical Squelch sensitivity 0.35µ V typ. ( at threshold) Adjacent Channel Selectivity 70dB typical Spurious response 70dB typical Intermodulation Rejection 70dB typical Hum and noise ratio 40dB typical Audio output power ( at 10% distortion, 8 © ) 600mW typ. Applicable IP Rating and environment test Ingeress protection standard: waterproof – IPX7 ( submersible protection) Environmental test standard: vibration – IEC60945 Measurement made in accordance with TIA/ EIA-603. All stated specifications are subject to change without notice or obligation. Supplied Accessories Battery pack, BP-266 Battery charger, BC-199S Belt clip, MB-124 Antenna, FA-SC58V Hand strap